Abarth

This Black Carpet with Red Trim Mat fits under the bonnet in the luggage compartment and is shaped to fitHas a Stitched Abarth Badgeto fit:Classic Fiat 500 F/L/R/G (from 1966 on) all modelsIf you have any questions please feel free to ask for help..

This Black Carpet Mat fits under the bonnet in the luggage compartment and is shaped to fitHas a Stitched Abarth Badgeto fit:Classic Fiat 500 F/L/R/G (from 1966 on) all modelsIf you have any questions please feel free to ask for help..

Black Powder Coated FinishSupplied with GasketsSmall Bore 30mm Twin Chrome Tail Pipesto fit:Classic Fiat 500 Giardiniera all modelsAutobianchi 500 Giardiniera & Furgoncino all modelsIf you have any questions please contact us for help..

Abarth 595 Black Decal KitSupplied as a 2 piece kit for both sidesto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Abarth 595 Red Decal KitSupplied as a 6 piece kit for both sidesto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Abarth 695 Black Decal KitSupplied as a 2 piece kit for both sidesto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Abarth 695 Red Decal KitSupplied as a 6 piece kit for both sidesto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

This is a lovely Alloy Screw on Petrol Tank Cap with laser cut Abarth Shield on top of the capComplete with Rubber Seal and Pressure Valve built into fit:Classic Fiat 500 D/F/L/R/G all models with long petrol tankIf you have any questions please contact us for help..

This is a lovely Alloy Screw on Petrol Tank Cap with laser cut Abarth Scorpion on top of the capComplete with Rubber Seal and Pressure Valve built into fit:Classic Fiat 500 D/F/L/R/G all models with long petrol tankIf you have any questions please contact us for help..

Abarth Alloy Rocker/Cam Cover with Twin Carburettor Manifoldto fit Twin Choke Carbs to fit:Classic Fiat 500 all models (including 695 Abarth)Fiat 126 all models (exc BIS) If you have any questions please contact us for help..

This is a kit consisting of1x  Abarth Alloy Rocker Cover1x  Abarth Yellow Oil Filler Cap1x  Rocker Cover Gasket Kitto fit:Classic Fiat 500 all models 479cc & 499ccFiat 126 all air cooledIf you have any questions please contact us for help..

Large Abarth Alloy Sump PanHolds 3.5 Litres of OilSupplied with Gasket & Boltsto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all air cooled models (up to 1999)If you have any questions please feel free to ask..

Large Abarth Alloy Sump PanHolds FOUR Litres of Oilto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all air cooled models (up to 1999)If you have any questions please feel free to ask..

This kit consists of1x Abarth Aluminium Rocker Cover1x Gasket1x Abarth Screw On Aluminium Oil Cap1x St Steel Braided Hoseall x Racing Spec Aluminium ConnectionsThe Breather connects to the Fuel Pump outlet on the side of the engine so that the vented oil is recircul..

This is a Plastic Badge with double sided tape on backsideDimmensions: 121mm x 35mmto fit:Many Abarth Models..

This is a full set of Black 'Pearlescent' Abarth Seat Covers for the Front and Rear SeatsThe Front Seats have the padded bolsters for extra support and stitched Abarth ShieldMade in good quality Vinyl as original to fit:Classic Fiat 500 D/F/L/R NOT GIARDINIERA (from 1960 to..

Made in ItalyThis is for ONE Metal Hub Cap to fit the Borrani Steel Wheelsto fit:Classic Fiat 500 all models If you have any questions please contact us for help..

Made in ItalyThese Chrome Brackets are fitted at the bottom of the engine lid between the rear panel and are used to keepthe bottom slightly open so that the hot air can escape and let cool air inlength 115mmto fit:Classic Fiat 500 N,D,F,L,R all modelsIf y..

This is a metalic white or black decal with tricole flagIdeal to fit onto a petrol tank, rear screen, bumper or almost any flat surfaceDimmensions: 280mm x 50mmPLEASECHOOSE THE COLOUR YOU WOULD LIKE AND ADD TO BASKET..

Kit of 2 Rubber Straps and Brackets to secure the Engine Lid on Abarth modelswith open Rear Engine LidSupplied with fittingsStrap Length 65mmto fit:Classic Fiat 500 Abarth or Replica modelsFiat 600 Abarth or Replica modelsIf you have any questions ple..