Classic Fiat 500 Parts & Spares

This is for ONE Copper Base gasket to fit onto the block under the BarrelTo fit 650cc (77.00mm Piston Size) EngineInside diameter 83.5mmto fit:Classic Fiat 500 (650cc)Fiat 126  (650cc)If you have any questions please ask for help..

Insulated Earth StrapLength: 420mmto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 early models (up to 1978)..

This is the Switch that is located where the Door Hinges are and turns the interior light on and off when the door opens and closesSupplied with a new rubber seal as in the photoRIC-7404RIC-1527to fit:Classic Fiat 500 all models (up to 1974)If you have any questions..

Brass Repair BushThis Bush is used to repair the hole in the Engine Crankcase where the Camshaft rotates and can be prone to wearto fit:Classic Fiat 500 F,L,R all modelsFiat 126 594cc & 652cc all modelsIf you have any questions please contact us for help..

This Aluminium Plug screws into the Crankcase near the dipstickThere is ONE of these Plug per CrankcaseSize M12 x 1.50to fit:Classic Fiat 500 all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

These metal plugs are inserted into the CrankshaftSupplied as a THREE piece kit of Metal Plugsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsIf you have any questions please contact us..

Crankshaft Nut Locking Ring for Pulley endto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

This is a new Sunroof Cover in CreamReady to install onto the frameto fit:Classic Fiat 500 Giardiniera all modelsIf you have any questions please contact us for help..

Due to wear and tear or lack of oil this part can become noisy after a timeRatio: 8/39to fit:Classic Fiat 500 with 126, 650cc gearbox (up to 1974)Fiat 126 all air cooled models NOT BISIf you have any queries or questions please feel free to ask..

Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500 N/D/F/L all modelsIf you have any questions please contact us for help..

Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500R 594cc all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

This is a standard Cylinder Head Gasketto fit:Classic Fiat 500 D/F/L  499cc  (from 1966 to 1972)If you have any questions please contact our office for help..

This is a standard Cylinder Head Gasketto fit:Classic Fiat 500 R  594cc  (from 1970 to 1974)Fiat 126  594cc Early ModelIf you have any questions please contact our office for help..

This is a standard Cylinder Head Gasketto fit:Classic Fiat 500 (with 650cc Engine)Fiat 126 650cc air cooled (up to 1999)(Does Not Fit Bis Water Cooled Model)If you have any questions please contact our office for help..

Cylinder Head GasketFiat Part No: 4037729to fit:Classic Fiat 500 Nuova & D (up to 1966)Classic Fiat 500 D Giuardiniera (up to 1966)Autobianchi Bianchina & PanoramicaIf you have any questions please contact us for help..

This Hollow Bolt is screwed into the Cylinder at either side and acts as a ventto relieve the pressure in the event of a Head Gasket Failureto fit:Classic Fiat 500 D/F/L  all modelsIf you have any questions please contact us for help..

Aluminium Dash Light and Bulb HolderHas a Blue Lense for the Head LampsThis Light is fitted into the dashboard next to the Speedo Pod(Has One Female Bullet Connector)to fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Aluminium Dash Light and Bulb (Sealed Unit)Has a Green Lense for the IndicatorsThis Light is fitted into the dashboard next to the Speedo Pod(Has One Spade Terminal Connector)to fit:Classic Fiat 500 all modelsFiat 600 all modelsFiat 850 all modelsIf you..

Aluminium Dash Light complete with bulb (sealed unit)Has a Blue Lense for the Head LampsThis Light is fitted into the dashboard next to the Speedo Pod(Has One Spade Connector)to fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Aluminium Dash Light Bulb HolderMade in Bakerlite with metal fittings for 4W Bayonette BulbThis Light is fitted into the dashboard next to the Speedo Pod(Has One Female Bullet Connector)to fit:Classic Fiat 500 all modelsIf you have any questions please con..