Classic Fiat 500 Parts & Spares

This flexible Hose fits at the front of the car to direct the hot air into the cabinThere are FOUR altogether, TWO under the dashboard and TWO under the bonnetMade in Insulated Foil Backed Cardboard as original to fit:Classic Fiat 500 all modelsFiat 126&..

This is one metre length of Heater Pipe.This length is enough to make up the Four Pipes you will require. Two for under the parcel shelf at the front and Two for under the bonnet.Made of Soft Card so it is really easy to cut to length. No jubilee clips required as it is the correct size for ..

Made in ItalyThis Metal Clip is the original type used to secure the rubber heater hoses from the engine thermostat to the tunnelFinished in ZincFiat Part No: 974592to fit:Classic Fiat 500 N/D/F/L/R all models NOT GIARDINIERAFiat 126 all air cooled models  NOT BISIf you need any help please con..

This heavy duty Shield has an aluminium frame and fits onto the inside of the Rear Engine LidIt will look very neat and tidy and will not flex or warpto fit:Classic Fiat 500 all models (up to 1974)If you have any questions please feel free to ask..

Hot Air Transfer Tube(If you have a 650cc engine fitted to a classic Fiat 500 then you need this Heat Tubeto join from the Thermostat Housing to the Tunnel)to fit:Classic Fiat 500 all models (with 650cc Engine fitted)Fiat 126  594cc & 650cc all modelsIf you hav..

This Aluminium Hub Cap is push fitted to the wheel and has the Fiat logo in the middleto fit:Classic Fiat 500 D Giardiniera estateFiat 600If you have any queries or questions please feel free to ask..

This Chrome Hub Cap is push fitted to the wheel and has the Fiat logo in the middleto fit:Classic Fiat 500 D Giardiniera estateFiat 600 DIf you have any queries or questions please feel free to ask..

This Stainless Steel Hub Cap is fitted with one Chrome Bolt in the middle (RIC 1517 supplied separately)The domed shape was originally designed for the Fiat 500 L models but they fit the F as wellto fit:Classic Fiat 500 L models (1969 up to 1973)If you have any qu..

This clip is used to hold the wheel hub caps onto the wheelto fit:Classic Fiat 500 Giardiniera all modelsFiat 600 all modelsIf you have any questions please feel free to ask for help..

A fast curing, single part anaerobic thread-lockerKey FeaturesA fast curing, single part anaerobic thread-locker A very high strength, low viscosity adhesive Suitable for bonding all threaded metal assemblies The low viscosity allows the product to penetrate close fitting assemblies..

Hylomar Universal Blue is the world's leading non-setting gasket and jointing compound. The product is used in the automotive, aerospace, defence and general enginerring industries when a non-setting flexible seal is required.It is a polyester urethane based sealant that is non-setting a..

OE Quality CoilBrushed Chrome FinishResistance Rated OHMS 1.5NOTE: Supplied without a bracket (see photo)Perfect to accompany any electronic ignition distributoror traditional factory points distributorFits many different models including,Classic Fiat 500 a..

Original Magnetti Marelli PartResistance Rated OHMS 3.0Fits many different models including,Classic Fiat 500 all modelsAutobianchi Bianchina all modelsClassic Fiat PandaFiat UnoFiat Strada/RitmoFiat 124 & 125Fiat 126,Fiat 127 & 128,Fiat 131 & 13..

Original Magneti Marelli PartResistance Rated OHMS 3.0NOTE: Supplied without a bracket (see photo)Fits many different models including,Classic Fiat 500 all modelsAutobianchi Bianchina all modelsClassic Fiat PandaFiat UnoFiat Strada/RitmoFiat 124 & 125 ..

This Spring is fitted inside the Distributor  and controls the bob weights thatoperate the contact pointsThis is supplied as ONE Spring (there are two springs inside the distributor)to fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions ..

This Ignition Kit consists of the following parts1x  Set Ignition Leads (with protective sheath & locating grommets) (RIC-498)1x  Distributor Cap (RIC-977)1x  Set Points (RIC-980)1x  Condenser (RIC-6164)1x  Rotor Arm (RIC-975)2x  Spark Plug (RIC-874)All Good Quality Brand..

This Ignition Kit consists of the following parts1x  Set Ignition Leads (with protective sheath & locating grommets) (RIC-499)1x  Distributor Cap (RIC-977)1x  Set Points (RIC-980)1x  Condenser (RIC-6164)1x  Rotor Arm (RIC-975)2x  Spark Plug (RIC-874)All Good Quality Brand..

This Ignition Kit consists of the following parts1x  Set Ignition Leads (with protective sheath & locating grommets) (RIC-500)1x  Distributor Cap (RIC-1015)1x  Set Points (RIC-980)1x  Condenser (RIC-6164)1x  Rotor Arm (RIC-975)2x  Spark Plug (RIC-874)All Good Quality Bran..

This Ignition Kit consists of the following parts1x  Set Ignition Leads (with protective sheath, locating grommets & Cap Cover)  (RIC-503)1x  Distributor Cap (RIC-978)1x  Set Points (RIC-980)1x  Condenser (RIC-6164)1x  Rotor Arm (RIC-976)2x  Spark Plug (RIC-874)All Good Q..

Brand NewThis Ignition Switch is fitted on the Steering Column and has a Steering Lockusually fitted to the Fiat 500 L models8 Pin Spade Connectionsto fit:Classic Fiat 500 L all modelsIf you have any questions please contact us for help..