Classic Fiat 500 Parts & Spares

A very neat kit that is fitted to the bottom of the engine between the crankcase and the sump  and houses the Oil FilterThis Oil Cooler Kit consists of,1x Alloy Engine Mounting Plate1x  Alloy Oil Cooler1x  Spin-on Oil Filter2x  Braided Hoses & Fittings1x  Oil Pump A..

This is a complete Oil Cooler Kit consisting of1x Oil Cooler Radiator1x  Modified Timing Cover2x  Stainless Steel Braided Pipesall x  Aluminium Connectionsto fit:Classic Fiat 500 D/F/L/R all modelsFiat 126 all air cooled modelsIf you have any questions pleas..

This Cap has a sprung loaded plastic circular disc at the end of the stem on the inside Metal Finish to fit:Classic Fiat 500 D Giardiniera  Estate all early models  If you have any queries or questions please feel free to ask..

Genuine Fiat PartThis Metal Spacer fits on the flange of the Oil Pick-Up (see diagram)Fiat Part No: 996354to fit:Classic Fiat 500 all modelsFiat 126 all  modelsIf you have any questions please contact us for help..

This is a brand new Oil Pump Gear Kit consisting of the Two Gears and Shaft to fit into the Oil Pump Housingto fit:Classic Fiat 500 499cc Giardiniera all modelsAutobianchi Giardiniera all modelsIf you have any questions please feel free to ask..

This beautiful Oval shaped Chrome Mirror bolts onto the front of the door or wing depending on which car you are fitting it to Comes with Rubber Seal & Screws to fitThis Mirror will fit both left and right side Dimmensions:Length 155mmWidth  90mm (lar..

Brand NewMade in ItalyThis is a pair of left and right hand Rear Lens with a smoked finishto fit:Classic Fiat 500 F,L,R all modelsIf you have any questions please contact us for help..

This is the complete Inner Panel Kit consisting of2x Inner Door Panel (for doors with integral metal inner door pull handle under the quarter light catch...see photos)2x Rear Inner Arch Panels2x Rear Arch Vinyl CoverThe Door Panels are made from strong board with holes cut in it already for the Hand..

This is the complete Inner Panel Kit consisting of2x Inner Door Panel (for doors without integral metal inner door pull handle under the quarter light catch...see photos)2x Rear Inner Arch Panels2x Rear Arch Vinyl CoverThe Door Panels are made from strong board with holes cut in it already for the H..

Original Quality66.2mm Oversize to fit:Classic Fiat 500 N/D all models (with 479cc Engine)Autobianchi Bianchina  If you have any queries or questions please feel free to ask..

Beautiful Polished Chrome Gear Knob has the Red Abarth Scorpioncomplete with Chrome Gear Leverto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsIf you have any questions please feel free to ask..

Beautiful Polished Chrome Gear Knob has the Red Abarth ScorpionThreaded for Screw on Fitting to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models If you have any questions please feel free to ask..

Polished Chrome Abarth Front Grille Has Three Threaded Studs to secureto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Polished Chrome Borrani Hub Cap to fit Borrani Steel Wheels to fit:Classic Fiat 500 all models If you have any questions please contact us..

Fitted to the charging system to avoid Radio interferenceFiat Part No: 46575541to fit:Classic Fiat 500 all modelsFiat 600 all modelsFiat 850 all modelsFiat 126 all  modelsIf you have any questions please contact us for help..

Rear Engine Lid Lock Handle and Keys finished in Black PlasticSupplied in a kit with Seals, Catch, Keys & Clip to fitto fit:Classic Fiat 500 D/F/L/R all modelsIf you have any questions please contact us..

These Seat Belts are the Automatic Inertia Reel type that are sprung loaded as are fitted to a lot of modern carsThe kit consists of two three point belts with matching buckles and all the fittingsVery simple to fit (drilling holes may be required for some models)Some models will..

THIS IS A KIT OF TWO FOR BOTH SIDESThese Seat Belts are the Static type that are not sprung loaded as are fitted to a lot of classic carsThe kit consists of two three point belts with matching buckles and all the fittingsVery simple to fit (drilling holes may be required for some..

Collapsable Rear Wheel Bearing SpacerWidth 13.5mm52mm x 25.9mm x 15.5mm Fiat Part No: 980753 (no 19 in diagram)to fit:Classic Fiat 500 N/D early models  If you have any questions please contact us for help..