Clutch and Transmission Parts

These bolts and washers are used to install the clutch plate onto the flywheelThis is a kit of6x Bolt high tensile6x Spring Washerto fit:Classic Fiat 500 all modelsFiat 124Fiat 125Fiat 126Fiat 127Fiat 128Fiat 600Fiat 850Fiat 900..

Clutch Cable Adjustment NutThis Threaded Domed Nut fits at the end of the Clutch Cable onto the Gearbox Lever to adjustSupplied with 2 additional nutsto fit:Classic Fiat 500 D,F,L,R,G all modelsFiat 126 all modelsFiat 600 all modelsIf you have any ques..

Clutch Cable Adjustment NutThis Threaded Domed Nut fits at the end of the Clutch Cable onto the Gearbox Lever to adjustDomed Nut is 20mm in lengthSupplied with 2 additional nutsto fit:Classic Fiat 500 D,F,L,R,G all modelsFiat 126 all modelsFiat 600 all mode..

Clutch DiscSix Course-spline TypeExtra Strength Six Spring DiscDiameter -155mmto fit:Fiat 600 & Multipla all early modelsIf you have any questions please contact our office for help..

Clutch DiscMade in ItalyTwenty Fine-spline TypeSix Spring DiscDiameter 160mmto fit:Fiat 600D all modelsFiat 600 Multipla all late modelsFiat 850 all modelsFiat 900T/E all modelsIf you have any questions please contact our office for help..

Clutch Forkto fit:Fiat 600 & Multipla all modelsIf you have any questions please contact us for help..

Three Piece Kit consisting of1x Clutch Pressure Plate1x Friction Disc (fine spline)1x Thrust BearingLate Type with 20 Spline shaftto fit:Fiat 600, Multipla all late modelsIf you have any questions please contact us for help..

Three Piece Kit consisting of1x Clutch Pressure Plate1x Friction Disc (fine spline)1x Thrust BearingEarly Type with six splined shaftto fit:Fiat 600, MultiplaIf you have any questions please contact us for help..

This is located at the Clutch Pedal to give it resistance and return it to its normal positionto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)Fiat 600 all modelsIf you have any questions please feel free to ask..

Brand NewMade in Italyto fit:Fiat 600 all models..

Wire Clip to hold the Clutch Release Bearing in positionFiat Part No: 878848to fit:Fiat 600 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyClutch Thrust Bearingto fit:Fiat 600 & 750 all modelsIf you have any questions please contact us for help..

Genuine SKF BrandThis is the Bearing thats is located in the Differential of the Gearbox65mm x 95mm x 16mmto fit:Fiat 600 all modelsAlso fits Seat & ZastavaIf you have any questions please contact us for help..

This Seal fits on the bulkhead between the engine and gearbox (see diagram)to fit:Fiat 600D all modelsIf you have any questions please contact us for help..

Genuine OE Quality PartsDIMENSIONS d 25 mm Bore diameter D 52/56 mm Outside diameter B 15 mm Widthto fit:Fiat 600D all modelsFiat 600 MultiplaSeat & Zastava 600/750 a..

This is an Original Style Rubber Gear Lever Bootto fit:Fiat 600 all modelsClassic Fiat Multipla all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis plastic Bush is fitted into the tunnel transfer box below the Gear lever (see diagram no 10)to fit:Classic Fiat 500 R modelsFiat 126 all modelsFiat 600D all modelsIf you have any questions please contact us for help..

Connects the Gear Linkage assembly to the Gearbox in order to select GearsThis part has a rubber joint in the middle that after a while will perish and make itdifficult to select gearsto fit:Fiat 600If you have any queries or questions please feel free to ask..

OE Quality BearingsKit of FOUR (4) Bearings for the GearboxThis kit consists of:1x Reverse Gear Bearing (RIC-7162)1x Gearbox Main Shaft Bearing (RIC-7182)1x Front Gearbox Main Shaft Bearing (RIC-7183)1x Rear Pinion Shaft Bearing (RIC-7184)to fit:Fiat 600 all..

Brand Newmade in Italyto fit:Fiat 600 all modelsFiat 600 Multipla all models..