%20[LIMITED%20to%20500px]-640x560w.jpg "Fiat 238,241,242")
Refine search
Model: (Top & Rear) all models
This is a 20 metre Roll Rubber & Metal ChannelAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside it13mmx14.5mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 a..
£95.94
Ex Tax:£79.95
Model: (Top & Rear) all models
This Rubber & Metal Channel is measured for ONE Door to fit along the top and down the rear of the door glass and into the doorAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside itFiat..
£11.94
Ex Tax:£9.95
Model: Fiat 600, 850 (Length 433mm)
Brand NewMade in ItalyONE Rear Drive ShaftLength 433mmDiameter 22mmto fit:Fiat 600 (from 1955 on)Fiat 850 Series 2If you have any questions please contact us for help..
£59.94
Ex Tax:£49.95
Model: 24mm Drive Shaft (F/L & R models, 126, 600)
Drive Shaft Clip(for 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..
£0.90
Ex Tax:£0.75
Model: all models
Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flangeFiat Part No: 16044121to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600If you have any queries or questions please contact our office for help..
£4.74
Ex Tax:£3.95
Model: Fiat Classic 500,126, plus many others
This is the Dry Type standard Coil (NOT Oil Filled Type)This is an alternative and direct replacement to the standard Coil and works better in a hot engine bayResistance 1.75 ohm15 = POSITIVE1= NEGATIVEFits many different models including:Fiat 500 all models
..
£41.94
Ex Tax:£34.95
Model: 499cc and 594cc
This rubber Boot fits onto the cable and over the Dynamo terminal to protect and insulate itThere are two options to choose SMALL or LARGEto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 594cc early models with Dynamo (up to 1976)Dimmensions:Total Length: 45m..
£2.34
Ex Tax:£1.95
Model: classic Fiat 500, 126 & 600
Electronic Indicator Flasher RelayPlastic Design3 Pin Fittingto fit:Classic Fiat 500 all modelsFiat 126 early modelsFiat 600 all modelsIf you have any questions please contact us..
£11.94
Ex Tax:£9.95
Model: Classic Fiat 500,126 & 600 all models
Non Adjustable Electronic Type Voltage RegulatorThis part fits to the rear Bulkhead of vehicle and connects to the DynamoFitted to an Aluminium plate for coolingto fit:Classic Fiat 500 all models (with Dynamo)Fiat 126 all early models up to 1978 (with Dynamo)Fi..
£38.34
Ex Tax:£31.95
Model: all models
This kit of Stickers are made to look original and fit on various parts of the engine bay to fit:Classic Fiat 600 D..
£22.74
Ex Tax:£18.95
Model: all models
These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all models (NOT Giardiniera)If you have any questions or queries please feel free to ask..
£2.34
Ex Tax:£1.95
Model: Fiat 600 all models
Quality Partmade in ItalySupplied with a new gasketto fit:Fiat 600 all modelsSeat 600 all modelsZastava 750..
£119.94
Ex Tax:£99.95
Model: Fiat 600 all models
This Gasket fits between the Exhaust and the ManifoldFiat Part No: 876075 to fit: Fiat 600 all models..
£3.73
Ex Tax:£3.11
Model: all models
This Brass Nut is used to attach the Exhaust to the Manifold(8mm x 1.25 x 8)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..
£1.20
Ex Tax:£1.00
Model: Fiat ,Lancia,Alfa Romeo, Autobianchi various models
This is a metal stud with these dimmensionsTotal Length 41mmThread 16mmShoulder 9mmThread 16mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..
£1.14
Ex Tax:£0.95
Model: Fiat ,Lancia,Alfa Romeo, Autobianchi various models
This is a metal stud with these dimmensionsTotal Length 37mmThread 20mmShoulder 7mmThread 10mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..
£1.80
Ex Tax:£1.50
Model: Fiat ,Lancia,Alfa Romeo, Autobianchi various models
This is a metal stud with these dimmensionsTotal Length 47mmThread 23mmShoulder 9mmThread 15mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..
£1.14
Ex Tax:£0.95
Model: all models
This Stud is used to attach the Exhaust to the Manifold/Engine(8mm x 1.25 x 42)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..
£1.14
Ex Tax:£0.95
Model: Fiat 600 & Multipla 633cc Series 1 all models
Genuine Old StockExhaust ValveApproximately 22.5mm Head Size to fit:Fiat 600 633cc all modelsFiat 600 Multipla 633cc If you have any questions please contact us for help..
£37.83
Ex Tax:£31.53
Model: Fiat, Alfa Romeo & Lancia
Multigrade Motor Oil(15W/40)Suitable for older and classic carsHigh quality 15W/40 mineral engine oil to meet the requirements of API SL/CG-4; ACEA A3/B3: MB: 229.1: Volvo: VDS-2Key FeaturesEnsures lubricant performance
Excellent high & low temperature performance
..
£27.54
Ex Tax:£22.95