Classic Fiat 126 Parts

OE QualityMade in ItalyRubber Seal to fit onto DipstickDimmensions:Length 47mmFits many different models including:Classic Fiat 500 R 594cc126 all models600,850,900,133,124,125,127,128,131,132Strada/Ritmo, RegataPanda, Uno all modelsCinquece..

OE Quality PartsMade in Italyto fit:Classic Fiat 500 R 594cc (up to 1974)Fiat 126 594cc & 650cc all early modelsIf you have any queries or questions please feel free to ask..

This Stainless Steel Bolt screws into the sides of the Distributor body to attach the metal spring clips to hold the Distribtor Cap in placeSupplied as ONE BoltFiat Part No:  9910387to fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models ..

These Stainless Steel Bolts screw into the sides of the Distributor body and attach the metal spring clips to hold the Distribtor Cap in placeSupplied as a kit of TWO Stainless Steel Boltsto fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models..

This is a Distributor Insulator Block that attaches to the side of the Distributor (see additional image)to fit:Classic Fiat 500 (with 594cc & 650cc Engine) all modelsFiat 126 (594cc & 650cc Engine) all modelsIf you need any help please contact us..

Brand NewGenuine Fiat PartsPrice is for ONE (1) Pin58mm x 8mmFiat Part No: 4350841to fit:Fiat 126 all modelsIf you have any questions please contact us for help..

This Plastic Door Lock Button is threaded and screws onto the door lock rod to open and lock the doorSupplied complete with Rubber Finishing Trimto fit:Classic Fiat 500 F/L/R (up to 1974)Fiat 126If you have any questions please feel free to..

This Rubber Ring fits around the hole in the door and the Door Lock Button fits through the middleShaped to fit the doorto fit:Classic Fiat 500 F/L/R (up to 1974)Fiat 126If you have any questions please feel free to ask..

This is a Door Lock Rod that fits inside the Door to operate the Locking Mechanismto fit:Fiat 126 all  models (up to 1999)If you have any questions please contact us for help..

This rubber pad or grommet fits around the Door aperture on the top and bottomThere are TWO per Doorto fit:Classic Fiat 500 all models..

Drive Shaft Clip(for 17mm Drive Shaft)to fit:Classic Fiat 500 N EARLY MODELSIf you have any questions or queries please contact our office for help..

Drive Shaft Clip(for 19mm Drive Shaft)to fit:Classic Fiat 500 N,D,F early modelsIf you have any questions or queries please contact our office for help..

Drive Shaft Clip(for 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..

Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flangeFiat Part No: 16044121to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600If you have any queries or questions please contact our office for help..

Brand NewThis is a new improved high quality Drive Shaft KitLargest Diameter available 24/25mm (this measurement can vary between 22mm and 25mm)This kit consists of,2x Drive Shafts(24/25mm diameter)2x Drive Shaft Flange2x Shaft End Springs2x Clips2x Inner Boots ..

These Metal Nuts are not threaded but lock onto the end of the Drive Shaft inside the Gearbox to lock in to placeThere are TWO Nuts per Drive ShaftSold as a PAIR (2)to fit:Classic Fiat 500 all models N/D/F/L/R/GFiat 126 all modelsIf you have any questions please con..

This small Spring is located at the wheel end of each drive shaft to keep the tension and stop any knocking(for later larger type 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R (up to 1974)Fiat 126 all modelsIf you have any queries or questions please contact our..

This is the Dry Type standard Coil (NOT Oil Filled Type)This is an alternative and direct replacement to the standard Coil and works better in a hot engine bayResistance 1.75 ohm15 = POSITIVE1= NEGATIVEFits many different models including:Fiat 500 all models ..

This Hub has three studs for the Fan Pulley to attach onto and is attached onto the Dynamo to drive the Cooling FanSupplied with new Nuts and Locking Keyto fit:Classic Fiat 500 all modelsFiat 126 594cc all models (with Dynamo)If you have any questions please feel free to ask..

This rubber Boot fits onto the cable and over the Dynamo terminal to protect and insulate itThere are two options to choose SMALL or LARGEto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 594cc early models with Dynamo (up to 1976)Dimmensions:Total Length: 45m..