Search

This is a Metal Lid to fit over the top of the Air Filter Housing to blank it offYou would use this if you fitted an alternative Carb or had a K & N Air Filter fittedFitted using the standard metal clips (supplied separately)to fit:Classic Fiat 500 F/L/R models except GiadinieraFiat 126 all air cool..

Accelerator Cable Nippleto fit:Classic Fiat 500 all modelsFiat 126 all Air Cooled modelsIf you have any questions please contact us for help..

Good QualityAdjustable Max Bolt fitting centre to centre: 105mmDiameter of Mirror: 110mmLength of Stalk: 100mmto fit:Multiple Applications includingClassic Fiat 500Fiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900 all modelsFiat..

This is for ONE (1) metre of Rubber Channel thats fitted around the door opening glassThis is usually fitted inside the aperture of the door around the door glass, and stays in place due to the flexible spine that into the gapSize 14.5mm x 13mmto fit:Classic Fiat 500 all models ..

This is a 20 metre Roll Rubber & Metal ChannelAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside it13mmx14.5mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 a..

This Rubber & Metal Channel is measured for ONE Door to fit along the top and down the rear of the door glass and into the doorAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside itFiat..

This three piece kit is for the metal strap that holds the dynamo in place to secure it to the engineto fit:Classic Fiat 500 N,D,F,L,R all models (except Giardiniera)Fiat 126 early models (up to 1977)If you have any questions please contact us for help..

OE Quality PartsMade in ItalyThis pad supports the top of the engine mount spring (see diagram)to fit:Classic Fiat 500 R all modelsFiat 126 air cooled all models..

Brand NewThis metal plate sits inside the top of the Rear Engine Mount Springto fit:Classic Fiat 500 R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewThis is the Air Filter top housing cover that is sandwiched between the front alternator and rear fan coversto fit;Fiat 126 all models (made for Polish versions with the opening vent)If you have ant questions please contact us for help..

This Rubber Bump Stop has a threaded bolt to attachto fit:Classic Fiat 500 all Models D/N/F/L/R/GFiat 126 all modelsIf you have any questions please contact us for help..

This is the centre bump stop thats located at the top of the leaf spring in the centre (see photo)to fit:Classic Fiat 500 all modelsFiat 126 all modelsAutobiaanchi Bianchina all models..

High Quality Productmade by major manufacturer in ItalyThis metal and rubber bush fits into the Front Leaf Spring at each end and also into the Front Stub AxleDimmensons:Inner Diameter [mm] 10Outer Diameter [mm] 27Height 1 [mm] 45Height 2 [mm] 51to..

Brand NewThis is a kit of a top and bottom metal cup located at the bottom of the gear lever inside the transfer boxto fit:Classic Fiat 500 all modelsFiat 126 all modelsAutobianchi Bianchina all models..

This Kit consist's of all the parts to overhaul a pair of Front Stub Axles(Including Top Bush, Brass Bushes, Steel Washers and Bearings to allow the steering to be lighter)One Bearing is installed on the bottom of each stub axle only to take the loadFits:Classic Fiat 50..

Brand NewMade in ItalyThis is made to fit onto a Panda 30 Carburetor WEBER DGF30 with an oval locating holeto fit:Classic Fiat 500 (with Panda 30 Head & Carburettor)Fiat 126  (with Panda 30 Head & Carburettor)If you have any questions please ask for help..

Common MOT Failure due to them perishing and falling off(No 4 in the diagram)to fit:Fiat 126 Bis all modelsIf you have any questions please feel free to ask..

Made in ItalyThis Rubber Bump Stop has a threaded bolt to attachSupplied as a PAIR (2)to fit:classic Fiat 500 all Models D/N/F/L/RFiat 126 (not Bis model)Autobianchi Bianchina..

Brand NewMade in ItalyRubber Seat Bump Stop Padto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis is for TWO Starter Motor Brushesto fit:Fiat 500 Topolino all modelsClassic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/E all modelsFiat 1100If you have any questions p..