Search

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Spring is a 5 Leafto fit: ..

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Leaf Spring has an extra Leaf for strength  6..

Bottom Radiator Hose as original with plastic end fittingsto fit:New Fiat 500 1.2 8V (from 2007 on)If you have any questions please contact us for help..

OE Quality PartsThis is a set of FOUR (4)to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have any queries or questions please feel free to ask..

OE Quality PartsThis is a set of FOUR (4)Oversized 0.05mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have any queries or questions please feel free to ask..

OE Quality PartsThis is a set of FOUR (4)Oversized 0.10mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have any queries or questions please feel free to ask..

Quality PartsMade in ItalyThis kit consists of1x Front Five Leaf Spring (lowered height average 30mm)2x Leaf Spring Bush2x Leaf Spring Clamp2x Front Shorter Sports Shock Absorber2x Rear Coil Spring (lowered height 35mm)2x Coil Spring Rubber Seat2x Coil Spring..

This Bracket and Stud Kit is used to lower the engine block and avoid the Exhaust fromhitting the Rear Panelto fit:Classic Fiat 500 F/L all modelsIf you have any questions please contact us for help..

This Bracket and Stud Kit is used to lower the engine block and avoid the Exhaust fromhitting the Rear Panelto fit:Classic Fiat 500 R all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

Kit consist's of,2x Standard 185mm Spring RIC-15242x Metal Support RIC-7852x Rubber Seat RIC-1132to fit:Classic Fiat 500 N/D/F/L all models (up to 1973)If you have any questions please feel free to ask..

Sports Rear Suspension Coil Spring Kit Supplied as a matching pair only Stiffer and Shorter Finished in Ferrari Red (14.5 Gauge Spring) 185mm Lengthto fit:Classic Fiat 500 all models (up to 1973)If you have any questions please feel free to ask for help..

OE Quality PartsMade in Italyto fit: 1100-1900 (101_) 1300 (116)Fitting Position: Front Axle More information 11.1961-02.1967 7494 45 61 1286 Saloon 1100-1900 (101_) 1500 Fitting Position: Front Axle More inf..

Quality OE Branded PartsMade in ItalyFiat Part No: 51945321 (no 4 in diagram)to fit:Fiat 500X 1.4, 1.6 & 2.0If you have any questions please contact us for help..

Brand NewMade in ItalyThis plastic Bush is fitted into the tunnel transfer box below the Gear lever (see diagram no 10)to fit:Classic Fiat 500 R modelsFiat 126 all modelsFiat 600D all modelsIf you have any questions please contact us for help..

Quality Made PanelsMade in ItalyThis panel is fitted underneath the dashboard from the floor up  and has the holes for the hot air ventsto fit:Classic Fiat 500 F/L/R all modelsIf you have any questions please contact us for help..

This Panel is only made for Left Hand Drive models but can easily be adapted to Right Hand Drive if required Fits: Classic Fiat 500 all models D/F/L/R/G If you have any questions please contact us for help..

This repair panel has been made to the shape of the bottom of the left hand door and will repair any rust bubbling on the outer skinto fit:Classic Fiat 500 all models (from 1965 to 1974)NOT SUICIDE DOOR MODELSIf you have any questions please feel free to ask..

This repair panel has been made to the shape of the bottom of the right hand door and will repair any rust bubbling on the outer skinto fit:Classic Fiat 500 all models (from 1965 to 1974)NOT SUICIDE DOOR MODELSIf you have any questions please feel free to ask..

This metal repair panel is to repair any corrosion around the lower section of the Rear Screento fit:Classic Fiat 500 all models except GiardinieraIf you have any questions please contact us for help..

Made in ItalyThis is the frame to house the Foam for the bottom of the rear seatYou would require Ricambio Part No:RIC-3003 to work with this frameto fit:Classic Fiat 500 N/D (up to 1966 all models)..