Search

The 123\FIAT-2-R is designed especially for Fiat500- and Fiat126-engines. With a design similar to the original distributor. No more wear, no more replacement of points and/or condensor EVER again.The advance is now electronically calculated : set it, and forget it! The 123\FIAT-2-R is designe..

Made by 123 in The NetherlandsThe 123\FIAT-500 is designed especially for Fiat500- and Fiat126-engines. With a clever design it is made possible to use the existing distributor. No more wear, no more replacement of points, condensor, rotor and cap, EVER again. The advance is now electronica..

The 123\FIAT-2-R is designed especially for Fiat500- and Fiat126-engines. With a design similar to the original distributor. No more wear, no more replacement of points and/or condensor EVER again.The advance is now electronically calculated : set it, and forget it! The 123\FIAT-2-R is designe..

The 123\FIAT-2-R is designed especially for Fiat500- and Fiat126-engines. With a design similar to the original distributor. No more wear, no more replacement of points and/or condensor EVER again.The advance is now electronically calculated : set it, and forget it! The 123\FIAT-2-R is designe..

Black Powder Coated FinishSupplied with GasketsSmall Bore 30mm Twin Chrome Tail Pipesto fit:Classic Fiat 500 Giardiniera all modelsAutobianchi 500 Giardiniera & Furgoncino all modelsIf you have any questions please contact us for help..

This is a kit consisting of1x  Abarth Alloy Rocker Cover1x  Abarth Yellow Oil Filler Cap1x  Rocker Cover Gasket Kitto fit:Classic Fiat 500 all models 479cc & 499ccFiat 126 all air cooledIf you have any questions please contact us for help..

Large Abarth Alloy Sump PanHolds 3.5 Litres of OilSupplied with Gasket & Boltsto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all air cooled models (up to 1999)If you have any questions please feel free to ask..

Large Abarth Alloy Sump PanHolds FOUR Litres of Oilto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all air cooled models (up to 1999)If you have any questions please feel free to ask..

This kit consists of1x Abarth Aluminium Rocker Cover1x Gasket1x Abarth Screw On Aluminium Oil Cap1x St Steel Braided Hoseall x Racing Spec Aluminium ConnectionsThe Breather connects to the Fuel Pump outlet on the side of the engine so that the vented oil is recircul..

Made in ItalyThis is for ONE Metal Hub Cap to fit the Borrani Steel Wheelsto fit:Classic Fiat 500 all models If you have any questions please contact us for help..

Made in ItalyThese Chrome Brackets are fitted at the bottom of the engine lid between the rear panel and are used to keepthe bottom slightly open so that the hot air can escape and let cool air inlength 115mmto fit:Classic Fiat 500 N,D,F,L,R all modelsIf y..

Kit of 2 Rubber Straps and Brackets to secure the Engine Lid on Abarth modelswith open Rear Engine LidSupplied with fittingsStrap Length 65mmto fit:Classic Fiat 500 Abarth or Replica modelsFiat 600 Abarth or Replica modelsIf you have any questions ple..

This is a Horn Push Button to fit most Wooden, Leather and Sports Steering WheelsDimmensions:Diameter of bottom 54mm (where it pushes into the steering wheel)Diameter of top 61mm (where the button is located)to fit:Classic Fiat 500 all modelsFiat 126 all models..

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Leaf Spring has an extra Leaf for strength  6..

This is an original style Abarth Oil Cap & SealRacing Red ColourMade to fit the Alloy Rocker Coverto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have any questions please feel free to ask..

Red Abarth Oil Filler CapThis is a twist on Oil Filler Cap complete with Rubber Sealto fit:Classic Fiat 500 various models with Aluminium Rocker CoverFiat 126 various models with Aluminium Rocker CoverFiat 600 all modelsFiat 850 all modelsFiat 850T & 900T/E all ..

Aluminium Number Plate Plinth/Light to mount the Rear Number Plate ontoHas four Holes drilled to mount onto the carVery easy to wire to the car the same as the original style Number Plate Lampto fit:Classic Fiat 500 all modelsIf you have any questions please co..

Brand NewAbarth Speedo Cluster/Head Unit Black Padded Casing with Blue/White Abarth Dials, with Chrome BezelsThe Unit has Four Dials includingSpeedometer in KPH Rev Counter Fuel Guage Oil Pressure to fit:Classic Fiat 500 all models (up to 1974)Fiat 126Fiat 600&..

Abarth Uprated Engine Mount SpringIf your Standard Engine is Tuned in any way then this Stronger Spring is designed to absorb any extra strainThis spring is designed for the later style 500R engine mount which is a spring and bolt type mount (please see diagram)to fit:Class..

Made in ItalyTo Fit:Classic Fiat 500 N & D models (up to 1966)..