Search

Brand NewMade in ItalyPowder Coated Black finishSmall Twin Reinforced Chrome Pipes 30mm Diameterto fit:Classic Fiat 500 all models with 594cc & 650cc Engine FittedFiat 126 594cc & 650cc all modelsIf you have any questions please contact us for help..

Brand newMade in ItalyThis kit consist's of2x  Bracket Kit RIC-317all x Bolts, nuts & washers to installto fit:classic Fiat 500 RFiat 126 594cc & 650ccIf you have any questions please feel free to ask..

Quality Partmade in Italyto fit:Classic Fiat 500 R (594cc engine size)Fiat 126 594cc & 650cc  (NOT 704cc BIS)..

This is a kit to install all the exhaust brackets to the engine and exhaustto fit:Classic Fiat 500R (with 600 or 650cc engine fitted)Fiat 126 air cooled all models..

This kit consist's of ONE Top and one Bottom Bracket to make a matching pair(you would require TWO pairs for one exhaust)to fit:classic Fiat 500 RFiat 126 594cc & 650ccIf you have any questions please feel free to ask..

Best Quality AvailableMade as per original specification with threaded Stud onto ExhaustThis part links from the Exhaust to the Engine, there are two per Engine to join both parts of the Exhaustto fit:Classic Fiat 500 D/N/F/L/R 499cc, 594cc, 650cc (not BIS)Fiat 126 all air c..

Best Quality AvailableMade as per original specification with threaded Stud onto ExhaustThis part links from the Exhaust to the Engine, there are two per Engine to join both parts of the ExhaustThis kit consists of1x Manifold (RIC 2954)1x Manifold Gasket (RIC 395)1x Exhaust G..

Made in PolandThis manifold is supplied with fittings and gasketsThis part links from the Exhaust to the Engine, there are two per Engine to join both parts of the Exhaustto fit:Autobianchi BianchinaFiat 500 D/N/F/L/R 499cc, 594cc & 126, 650cc (not BIS)Fiat 126 ..

This Gasket fits between the Exhaust and the Manifold/ElbowYou would normally change them as a pairto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 600cc/650cc  (NOT Bis)..

This is for 5 metres x 50mm of Heat Wrap for the exposed exhaust to insulateSupplied with Six Stainless Steel Cable Ties to secureto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsPLUS any other carsIf you have a..

This is a pair of high tensile Bolts and Spring Washers to fit the Exhaust Manifoldsto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please fee free to ask..

This kit consists of all the parts to install an exhaust manifold to cylinder head and exhaust1x Exhaust Gasket (RIC 394)1x Exhaust Manifold Gasket Rear (RIC 395)2x Brass Nut & Spring Washer (RIC 939)2x Manifold to Head Bolts & Spring Washers (RIC 1898)to fit:Classic Fia..

This Gasket fits between the Exhaust Manifold/Elbow and the EngineYou would normally change them as a pairto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 600cc/650cc  (NOT Bis)..

This Stud is used to attach the Exhaust to the Manifold/Engine(8mm x 1.25 x 42)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..

Original QualityOVERSIZED 30mmSingle GrooveLength: 115.500 mm Material: Chrome-nickel-magnesium-steel Valve Head Diameter: 30.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmto fit:Classic Fiat 500 D/F/L/R & Giardiniera (1966 to 1974)Fiat 126..

Original Qualitymade by AESingle GrooveLength: 116.000 mm Material: Chrome-nickel-magnesium-steel Valve Head Diameter: 28.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmto fit:Fiat 126  650cc Air Cooled & 704cc BisFiat Panda 30 ..

Original Qualitymade in ITALYSingle GrooveLength: 116 mm Material: Chrome-nickel-magnesium-steel Valve Head Diameter: 28.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmSupplied as a PAIR (2)to fit:Classic Fiat 500 D/F/L/R & Giardiniera (1966..

Original Qualitymade in ItalyThis is for a PAIR (2) of Exhaust ValveThree GrooveLength: 115.500 mm Material: Chrome-nickel-magnesium-steel Valve Head Diameter: 28.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmto fit:Fiat 126  650c..

This Brass Nut is used to attach the Exhaust to the Manifold(8mm x 1.25 x 16)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..

Brand NewMade in PolandThis is a racing Exhaust with little if any baffle so you will not be popular with the neighbours!!Supplied with the special reinforced Bracketto fit:Classic Fiat 500 all models with 650cc engine fittedFiat 126 650cc all modelsIf..