Search

This kit consists of1x Abarth Aluminium Rocker Cover1x Gasket1x Abarth Screw On Aluminium Oil Cap1x St Steel Braided Hoseall x Racing Spec Aluminium ConnectionsThe Breather connects to the Fuel Pump outlet on the side of the engine so that the vented oil is recircul..

Brand NewMade in ItalyThis Modified Aluminium Bush attaches the Accelerator Control Pivot Lever to the top of the fan cowlingto fit:Classic Fiat 500 N, D, F, L, R all modelsFiat 126 All Air Cooled ModelsIf you have any questions please contact us for help..

This is a Replica of the tanks used by the official Lancia Racing Team.Capacity 80lt.Made of aluminum with internal anti-slamming bulkheads, housing for the petrol float as standard. Connection for venting petrol vapors and for petrol return if provided. Included is the closing panel for the..

Brand NewMade in ItalyThis Aluminium Cover is supplied with new Bolts, Nuts & Washers and fits on top of the fan cowling to remove the air filter canisterto fit:Classic Fiat 500 N/D/F/L/R ALL MODELSFiat 126 all air cooled modelsIf you have any questions please..

This U shaped Clip is used to join the Window Trim ends together at the rear part of the door so they appear to be one continuous trimAs a guide you would need TWO (2) per doorFinished in Blackto fit:Fiat 126 all models (up to 1999)If you have any queries or questi..

Made in ItalyThis is an Aluminium Moulding that it usually fitted on the middle of the Front Bonnet of the early pre-66 Fiat 500 modelsto fit:Classic Fiat 500 N,D & G all models (up to 1966)If you have any questions please contact us for help..

Made in ItalyThis is an Aluminium Moulding that it usually fitted on the middle of the Front Bonnet of the early series 1 modelsto fit:Fiat 600 series 1 all models (up to 1966)If you have any questions please contact us for help..

Brand NewThis is a PAIR (2) of left and right adjusting cams to adjust the aluminium brake shoes in the back platesThere are twop choices with either 8mm or 10mm thread/nutto fit:Fiat 600 series 1Fiat 1100 early models..

This is an Aluminium Crankcase Breather that bolts to the fuel pump outlet& circulates the pressureSupplied with1x Aluminium Crankcase Breather1x Silicone Breather Hose in Red, Blue or Black 500mm1x  Fuel Pump Gasketto fit:Classic Fiat 500 N/D/F/L/R all models ..

This is a Pair (2) of Aluminium Plugs that would need to be welded into the CrankcaseDiameter: Large 41.5mm Small  24.5mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Made in ItalyThese lovely Anodized Aluminium Distributor Caps come with a rubber seal andare held in place with the two distributor clips on either sideTo fit the distributor with the wasted spark type ignitionto fit:Classic Fiat 500 N/D/F/L/R all models (with was..

Good Quality Aluminum Door Opening HandleHandle to open the door from the inside of the carto fit:Classic Fiat 500 N/D/F/L/R all model (up to 1974)Fiat 850T & 900T/E(This Handle will fit most early model Italian Cars from the sixties up to the ninetiesa..

This is for ONE Front Indicator Lamp with White Lens complete with a Rubber BootSupplied with Amber Bulbto fit:Classic Fiat 500 F early models (up to 1968)If you have any questions please contact us for help..

Good Quality AluminiumONE Bezel for ONE Head LampComes complete with Clips to fit to Head Lampto fit:Classic Fiat 500 N/D/F/L/R/G all models (up to 1974)If you have any queries or questions please feel free to ask..

Brand New OLD STOCKGenuine PartsThis is a PAIR (2) of Aluminium Bezelsto fit;Fiat 600 Multipla all models..

This is an Aluminium Head Lamp Bezel/SurroundHas a slight eyebrow at the topto fit:Fiat 600 all models (with small Head Lamp)If you have any questions or queries please contact us..

Brand NewMade in ItalyThis is for ONE Aluminium Handle to open the door from the inside of the carto fit:Fiat 600 early modelsIf you have any questions please contact us for help..

This Handle fit's inside the door and you would normally pull it to pull the door shut from inside the vehicleThere is two options of screw size (M5 or M6), please select which screw size you requireSupplied with:1x Aluminium Handle2x Aluminium Bracket2x Screw (M5 o..

These Trims are fitted on the inside edge of the door opening and are shaped to fit snuglyover the Door Seal and protect it from any damage when getting in and out of the carSupplied as a pair, one for each sideFinished in Aluminium and comes complete with new Screws to fit..

These Trims are fitted on the inside edge of the door opening and are shaped to fit snuglyover the Door Seal and protect it from any damage when getting in and out of the carSupplied as a pair, one for each sideFinished in Aluminium and comes complete with new Screws to fit..