Search

This Wheel Bolt has a Flat Head with Domed Chrome Finsh to fit various wheelsDimms:  Bolt Diameter M10mm x 40mm,  Total Length 60mmto fit:Classic Fiat 500 all modelsFiat 126 all early models (up to 1978)If you have any questions please feel free to ask..

This is a set of FOUR Brake ShoesTo fit Front or RearThese Shoes are not the self adjusting type as on some later modelsThese Shoes have a short top 'Lug' as opposed to another type that has a long top 'Lug'  (see photo 3 to explain, these are the type on the right hand side) ..

This is the idle Float that is inside the CarburettorDimmensions: 40mm x 28mmto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all models (up to 1994)Fiat 600If you have any questions please feel free to ask..

OE Quality with original style rubber bootsMade in ItalyTo fit:Classic Fiat 500 F/L/R/GFiat 126 all early modelsIf you have any queries or questions please feel free to ask..

Beautiful Quality Chrome MirrorBullet Domed ShapeCentre to Centre of fitting bolts 87mmTwo Bolt Fitting, supplied with Screws and Rubber Sealto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 124 Spider,..

Beautiful Quality Chrome MirrorCentre to Centre of fitting bolts 87mmTwo Bolt Fitting, supplied with Screws and Rubber Sealto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 124 Spider,CoupePlus Many More Mode..

OE Quality PartsMade in ItalyCommon Failure on many Fiat & Alfa ModelsThis Shaft holds the Thrust Bearing in place inside the Gearbox and is prone to wearShaft is supplied with two new Bushes as requiredto fit:Fiat Punto Mk1,Fiat Punto Mk2,Fiat Grande Punt..

This Minature Bulb is used for the dashboard Speedo and Dash LightsKey FeaturesDirect Replacement Bulb E marked for legal use on UK roads Warranty Period - 1 Year ECE - T4WIf you have any questions please contact us for help..

OE QualityMade in ItalyRubber Seal to fit onto DipstickDimmensions:Length 47mmFits many different models including:Classic Fiat 500 R 594cc126 all models600,850,900,133,124,125,127,128,131,132Strada/Ritmo, RegataPanda, Uno all modelsCinquece..

Insulated Black Earth StrapLength: 500mmTakes an 8mm fittingto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 early models (up to 1978)If you have any questions please contact us for help..

Non Adjustable Electronic Type Voltage RegulatorThis part fits to the rear Bulkhead of vehicle and connects to the DynamoFitted to an Aluminium plate for coolingto fit:Classic Fiat 500 all models (with Dynamo)Fiat 126 all early models up to 1978 (with Dynamo)Fi..

This is the Front Hub Sealto fit:Classic Fiat 500 Giardiniera all modelsFiat 126 652cc & 704cc all models (from 1979 to 1999)Fiat 850 Saloon & Special (from 1964 to 1972)Fiat 900 T/E all models (from 1978 to 1986)If you have any questions please feel f..

This is for ONE ShimVarious Sizes Available from 0.70 to 1.30to fit:Classic Fiat 500 F/L/R/G all modelsFiat 126 all models..

Brand NewOE Quality Oil SealSize 19.8mm x 40mm x 5.5/8mmThis is the Oil Seal that fits into the housing (number 25 in the diagram)to fit:Classic Fiat Panda all modelsFiat UnoFiat Cinquecento all modelsNew Fiat 500 various modelsAutobianchi A112..

OE Quality CoilBrushed Chrome FinishResistance Rated OHMS 1.5NOTE: Supplied without a bracket (see photo)Perfect to accompany any electronic ignition distributoror traditional factory points distributorFits many different models including,Classic Fiat 500 a..

Best Quality Availablemade by PIRELLI in ItalyMade to fit around the aperture of the door on the carPrice is per metre (1)(You would need 4 metres per door for the Fiat 500 & 126)to fit:Classic Fiat 500 F/L/R (from 1966 to 1974) NOT suitable for suicide door mo..

This Boot simply pushes on and replaces the split boot on the steering ball jointsto fit:Classic Fiat 500 all models (up to 1974)Fiat 600 all modelsFiat 850 all modelsFiat 124 all modelsFiat 126 all models (up to 1999)Fiat 127 & 128If you have any quer..

This bar fits between the Inner and Outer Track Rod Ends and comes with two clamps to fitTo fit:Classic Fiat 500 F/L/R/GFiat 126 all early modelsFiat 600 all modelsIf you have any queries or questions please feel free to ask..

Original Type Voltage RegulatorThis part fits to the rear Bulkhead of vehicle and connects to the Dynamoto fit:Classic Fiat 500 all models (with Dynamo)Fiat 126 all early models up to 1978 (with Dynamo)Fiat 600D & Multipla all modelsFiat 850 various modelsFiat 1..

This is a Wooden Steering Wheel with alloy drilled Spokes complete with a Horn PushWe have various different Horn Push emblems available includingFiat, Bertone, Pininfarina & Abarth so let us know your preference in the comments box while placing your orderFor every application..