Search

The 123\FIAT-2-R is designed especially for Fiat500- and Fiat126-engines. With a design similar to the original distributor. No more wear, no more replacement of points and/or condensor EVER again.The advance is now electronically calculated : set it, and forget it! The 123\FIAT-2-R is designe..

Made by 123 in The NetherlandsThe 123\FIAT-500 is designed especially for Fiat500- and Fiat126-engines. With a clever design it is made possible to use the existing distributor. No more wear, no more replacement of points, condensor, rotor and cap, EVER again. The advance is now electronica..

The 123\FIAT-2-R is designed especially for Fiat500- and Fiat126-engines. With a design similar to the original distributor. No more wear, no more replacement of points and/or condensor EVER again.The advance is now electronically calculated : set it, and forget it! The 123\FIAT-2-R is designe..

The 123\FIAT-2-R is designed especially for Fiat500- and Fiat126-engines. With a design similar to the original distributor. No more wear, no more replacement of points and/or condensor EVER again.The advance is now electronically calculated : set it, and forget it! The 123\FIAT-2-R is designe..

Black Powder Coated FinishSupplied with GasketsSmall Bore 30mm Twin Chrome Tail Pipesto fit:Classic Fiat 500 Giardiniera all modelsAutobianchi 500 Giardiniera & Furgoncino all modelsIf you have any questions please contact us for help..

This is a kit consisting of1x  Abarth Alloy Rocker Cover1x  Abarth Yellow Oil Filler Cap1x  Rocker Cover Gasket Kitto fit:Classic Fiat 500 all models 479cc & 499ccFiat 126 all air cooledIf you have any questions please contact us for help..

Large Abarth Alloy Sump PanHolds 3.5 Litres of OilSupplied with Gasket & Boltsto fit:Classic Fiat 500 N/D/F/L/R all models (up to 1974)Fiat 126 594cc & 650cc all air cooled models (up to 1999)If you have any questions please feel free to ask..

Made in ItalyThese Chrome Brackets are fitted at the bottom of the engine lid between the rear panel and are used to keepthe bottom slightly open so that the hot air can escape and let cool air inlength 115mmto fit:Classic Fiat 500 N,D,F,L,R all modelsIf y..

Kit of 2 Rubber Straps and Brackets to secure the Engine Lid on Abarth modelswith open Rear Engine LidSupplied with fittingsStrap Length 65mmto fit:Classic Fiat 500 Abarth or Replica modelsFiat 600 Abarth or Replica modelsIf you have any questions ple..

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Leaf Spring has an extra Leaf for strength  6..

This is an original style Abarth Oil Cap & SealRacing Red ColourMade to fit the Alloy Rocker Coverto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have any questions please feel free to ask..

Aluminium Number Plate Plinth/Light to mount the Rear Number Plate ontoHas four Holes drilled to mount onto the carVery easy to wire to the car the same as the original style Number Plate Lampto fit:Classic Fiat 500 all modelsIf you have any questions please co..

Abarth Uprated Engine Mount SpringIf your Standard Engine is Tuned in any way then this Stronger Spring is designed to absorb any extra strainThis spring is designed for the later style 500R engine mount which is a spring and bolt type mount (please see diagram)to fit:Class..

Made in ItalyLength: 62mmto fit:Fiat 124 Saloon,Coupe & Spider all modelsPininfarina 124 Spider all models..

This assembly consists of the following parts, 1x  Inner Track Rod End1x  Outer Track Rod End1x  Centre Track Rodall x Joints to fit Fits on both sides (1+3+2) in diagram to fit:Fiat 1300 all models all late modelsFiat 1500 al..

This assembly consists of the following parts, 1x  Inner Track Rod End1x  Outer Track Rod End1x  Centre Track Rodall x Joints to fit to fit:Fiat Dino 2000, 2400 all models  If you have any questions please contact us ..

Made in ItalyThis is a beautiful machined Alloy Rocker Cover without any brandingSupplied with1x Rubber Rocker Cover Gasket & Fibre Washers1x Alloy Screw on Capto fit:Classic Fiat 500Fiat 126 Air CooledAutobianchi Bianchina (not panoramica)THIS ROCKER..

When you change over to an Alloy Rocker Cover on a Classic Fiat 500 or 126 the Studs are usually too short to reach, as the Alloy Covers are higherThis kit consists of2x  Longer Studs 115mm2x  St Steel Nyloc Nut2x  Fibre Washerto fit:Classic Fiat 500 N,D,F,L,R..

Brand NewMade in Italyto fit:Classic Fiat 500 all models (with Alternator fitted)Fiat 126 all air cooled models (with Alternator fitted)If you need any help please contact us..

This Metal Cover fits to the front of the Fan Cowing and houses the AlternatorThis item is used to upgrade the Generator from a Dynamo on a standard 500 Engine to an Alternator whichis generally more reliable and produces more powerto fit:Classic Fiat 500 all modelsFiat 126..