Malospa Akron

Brand NewMade in ItalySupplied with a rubber sealto fit:Fiat Tipo  all modelsFiat Tempra all modelsAlfa Romeo GTV all models (from 1995 to 05)Alfa Romeo 145, 146  all models (from 1994 to 01)Alfa Romeo 155  all models (from 1992 to 97)If you have ..

OE Quality PartsInner Drive Shaft Bearing & SealFits inside the Inner Drive Shaft BootInner Diameter 23mmNumber 9 in the diagramto fit:Classic Fiat Panda all models (1987/88 on)Fiat Uno   (1987/88 on)Fiat Tipo/Tempra  (1987/88 on)Fiat Cinquecento al..

This Inner Drive Shaft Boot is clipped onto the outside of a metal flangeWould normally fit on the Left Hand Side of the vehicleIt has a built in Oil Seal to stop oil leaking and fits onto the Drive Shaft with a incapsulated plastic Bush(No 7 in the diagram)Diameter of base..

Quality Rubbermade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Metal Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F/L..

This Inner Drive Shaft Boot fits into a three bolt metal flange and has a clip to hold the other end onto the drive shaftIt comes with an inner bearing/oil thrower which fits onto the shaftThis Kit comes with a new Rubber Boot, Bearing & Clip (No 3,14 &15 in the diagram)Inner diamet..

OE Equivalent PartsMade in ItalyTeeth: 20Diameter 25.5mmto fit:Classic Fiat Panda 903cc (from 1980 on)Fiat 127 903cc, 1049cc & 1301cc  (1971 to 86)Lancia A112  903cc Junior, 1049cc Abarth  (up to 86)If you have any questions please contact us for h..

Teeth 21Dimmensions: 32mm x 10.5to fit:Alfa Romeo Mito 1.4 16VFiat New 500 1.2, 1.4 & 1.3 MJTDFiat New Panda 1.2, 1.4 & 1.3 MJTDFiat Punto MK1 1.2 8V & 16VFiat Punto MK2  1.2, 1.4 & 1.9DSFiat Grande Punto 1.4 8VFiat Stilo 1.2, 1.4 & 1.6Fiat Doblo 1.2..

Brand New Branded Quality Parts  (20 teeth) to fit:New Fiat 500 1.1 & 1.2 8V (from 2007 on)New Fiat Panda 1.1 & 1.2 8V (from 2003 on) Please let us have the full chassis number of the car and we will confirm if this is the correct part for ..

Made in Italyto fit:Lancia Beta 1995cc (1978 to 82)..

Brand NewMade in ItalyThis is the Rubber Boot as original for the Wheel End of the Drive Shaft onto the CV JointSupplied as a kit including1x Rubber Boot2x Metal Ties to secure1x Pouch of Greaseto fit:Classic Fiat Panda all modelsFiat Uno all models (EXC..

Brand NewMade in ItalyThis is the Rubber Boot as original for the Wheel End of the Drive Shaft onto the CV JointSupplied as a kit including1x Rubber Boot2x Metal Ties to secure1x Pouch of Greaseto fit: A 112 0.9 Junior More information ..

Brand NewOE Quality Partsto fit: BARCHETTA (183_) 1.8 16VFitting Position: Front Axle Left, Front Axle Right, Wheel SideManual Transmission More information 04.1995-05.2005 4760 96 130 1747 Convertible BRA..

This Outer Drive Shaft Boot fits onto the Wheel end of the Drive Shaft at the CV JointDiameter at smaller Shaft End: 25mmDiameter at larger Joint End: 85mmto fit:STRADA Abarth 125/130TCCroma 2.0 CHT & IELancia BetaPlease contact us with the full chassis num..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the FlangeDiameter:  19mm (smaller type shaft)(These are designed to be nice tight fit so they..

This Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the Flange Diameter:  17mm (smaller type shaft)(These are designed to be nice tight fit so they may seem to sma..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the FlangeDiameter:  22-24mm (larger type shaft)(These are designed to be nice tight fit so they ma..

Front Anti Roll Stabilizer Bar BushInner Diameter: 20mmto fit: FIAT 124 1200 124 A.000 0048 0065 04 02 02/1973 07/1975 Petrol from Chassis No. : 986264 FIAT 124 1200 (TA) MOTORE GENERICO 004..

To fit the Brake & Clutch Pedals onlyDimmensions:Length 65mmWidth 50mmto fit:Classic Fiat Panda all modelsNew Fiat Panda 1.1, 1.2 & 1.3 MultijetFiat 124 all modelsPininfarina Spider all modelsFiat 127 & 128Fiat Ducato  (up to 2002)Lancia Y10 all model..

Made in Italy10x 1.25to fit:Lancia Beta Montecarlo, HPE, Coupe & Spider all modelsLancia GammaLancia Flavia 2000If you have any questions please contact us for help..

Brand New OE Quality PartMade in ItalyThis is the Brake Hose that fits at either side of the rear wheelsLength: 175mmto fit:Fiat 124 Familiare 1.2  (1967 to 75)Fiat 124 Coupe 1.4,1.6, 1.8 all models (1967 to 76)Fiat 124 Spider 1.6,1.8 & Rally all models..