FRAP

Quality Branded PartsMade in ItalyM14 x 1.5mmNo.1 in diagramto fit:Lancia Fulvia S1 all models (1963 to 69)Lancia FlaviaIf you have any questions please contact us for help..

Brand Newmade in ItalyOuter Track Rod End complete with a Grease Nipple underneath so you can keep it topped up with greaseSuppled with a new NutTo fit:Classic Fiat 500 N/D/G (from 1957 to 1965)If you have any queries or questions please f..

These Two Bushes are pressed into the Rear Suspension Arm and are a common failure which would cause a knocking noise from the rear of the car.Come as a pair (2) with new Bolts and Lock Nutsto fit: CINQUECENTO (170_) 0.7 (170AA)Fitting Position: Rear Axle b..

OE Quality PartsMade in ItalyThis kit consists of all the parts to repair the Rear Suspension Armincluding:   Bolt,Nut,Spacer,Bearings etcThis is a relatively easy repair to do and would probably take around one hour per armto fit: BARCHETTA (183_) 1.8..

OE Quality PartsMade in ItalyThis is a kit of parts to repair ONE Rear Trailing Arm2x  Bearings2x  Washers2x  Seals1x  Seal1x  Bolt & Nutto fit:BRAVA (182_) 1.2 16V 80for control armMore information10.2000-10.20011556359801242Hatchback ..

OE Quality PartsMade in Italyto fit:Fiat Croma all models (up to 1994)Lancia Thema all models inc 8.32 & V6Alfa Romeo 164 all models..

OE Quality PartsMade in Italyto fit:Fiat Coupe all modelsFiat Bravo all modelsFiat Tipo/Tempra all models..

Brand New OE Quality Parts made in ItalyThis is the Center Drag Link which has two bends in it  (no 4 in the diagram)to fit:Fiat 124 Sport all models (1970 to 75)Fiat 124 Spider all models (1970 to 85)If you have any questions please contact us for help..

Brand NewOE Quality Parts made in ItalyThis is the Center Drag Link which has two bends in it (no 4 in the diagram)to fit:Fiat 124 Sport all models (1970 to 75)Fiat 124 Spider Europa all models (up to chassis number 5506002 1975)Fiat 124 Special & Special T (up to 1975)If you have any questions ple..

Good quality part made in by FRAP in ItalyThis is an assembly of three parts for one side of the carFiat Part NO: 4100057,4117875,4102045,4114654  (no 1,2 & 3 in the diagram) to fit:Fiat 1100 D/R (from 1957 on) If you need help please contact us..

Brand NewOE Quality Made in ItalyDimmensions:   M12 x 1,5 14 x 1,5 (L=205mm)to fit:Fiat 126 Bis all models (from 1986 to 1996)If you have any questions please contact us for help..

Brand NewOE Quality Made in ItalyDimmensions:   14 x 1 14 x 1,5 (L=135mm)to fit:Fiat 126 all air cooled models (from 1978 to 1986)Autobianchi A112 (from 1972 to 82)Fiat 127 all models (1971 to 82)If you have any questions please contact us for help ..

Brand NewBranded PartsMade in Italy Fitting Position Front Axle left and right Overall Length [mm] 278 mm Observe technical data Thread Size 1 M14x1,5 Thread Size 2 M12x1,5to fit:Fi..

Brand NewMade in ItalyNumber 3 in DiagramThis Track Rod screws into the Steering Rack and then the Track Rod End screws onto itto fit:New Fiat 500 (from 2007 on)If you have any questions please contact us for help..

Quality Part made in Italy by FRAP(NO 3 in the Diagram)Available as a separate parts this Track Rod is attached to the Steering Rack and the Track Rod Endscrews into it to connect to the wheel Usually you would have to purchase a new Steering Rack if this part was damagedLength: 265..

OE Quality PartsMade in ItalyNumber 2 in the diagram Fitting Position Front Axle Right, Front Axle Left Length 267 mm Thread Size 1 M12x1,5 Thread Size 2 M16x1,5to fit; BARCHETTA (18..

This bar fits between the Inner and Outer Track Rod Ends and comes with two clamps to fitTo fit:Classic Fiat 500 F/L/R/GFiat 126 all early modelsFiat 600 all modelsIf you have any queries or questions please feel free to ask..

OE Quality PartsMade in Italy Fitting Position Front Axle Right, Front Axle Left, outer D1 13 mm Length 1 153 mm Length 2 21 mm Thread Size 1 M12X1,5 Thread Size 2 M12X1,207t..

OE Quality PartsMade in Italy Fitting Position Front Axle Right, Front Axle Left Length 198 mm Thread Size 1 M14x1 Thread Size 2 M10x1,25 Weight 0.618 kgto fit: 126 (126_) 650..

Brand NewOE Quality PartsMade in Italy14mm x 1mm190mmto fit:Autobianchi A112 all models inc AbarthLancia A112  all models..